Unfolding Instruction Step 1 Prepare to unfold your bicycle by standing on the side you. Note that some models have the handle post folded you. Note that some models have the handle post folded to the outside. Step 2 Unfold the frame by swinging the front and rear halves of the frame apart. Step 3 Lock the frame latch lever by pushing it in towards the frame. It should require 6 kg. of force to close. Step 4 Move the frame latch safety hook into the closed position. Your frame latch safety hook is in the closed position when it prevents the frame latch from opening. (Note: Your frame latch safety hook may be in a slightly different position than shown in the picture above.) Step 5 Swing the handle post up to its vertical position. Step 6 Push the handle post latch inwards until it snaps closed. Step 7 Rotate the stopper hook so that it secures the post latch. Step 8 Adjust the TelescopeTM stem to the desired height. Step 9 Open the seat post quick-release lever and raise the saddle to the desired height. Close the seat post quick release lever. Be sure not to raise the seat post beyond the safety line marked on the seat post. Step 10 Attach or unfold the pedal(s). If you are attaching your pedal(s), please note that the right pedal should be screwed in clockwise. The left pedal should be screwed in counter-clockwise. (Please follow the above instruction if pedals unmounted) Step 11 If you are unfolding your pedals, flip the pedal into the horizontal position. Caution: Be careful not to pinch your fingers. Step 12 You are ready to ride! Have fun and ride safely!